| |
| |
|
| |
| * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
| |
|
Watch
the video of the floating marsh buggy
and
the video of the working marsh buggy
|
| |
| * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
| |
 |
 |
| |
 |
| |
| |
 |
| |
|
| |
Marsh Buggy Goes Where Traditional Excavators Cannot Go
New from LongReachHighReach (LRHR) is the Amphibious Marsh Buggy (Amphib MB) specifically designed to maneuver and go through swampy areas with soft underfoot terrain where traditional excavators cannot go.
The Amphib MB is extremely productive in dredging, erosion control and erosion prevention. It also provides efficiency in waterway, river and pond shoreline construction and can be used for maintenance and clearing of rivers, lakes and other water projects.
The track chain is a three rail system. Shoes and cleats are supported by the track chain which provides a unifying pulling force with a superior weight to drive ratio across each track shoe and cleat.
A manual expansion system allows the pontoons to move in and out by one-foot on each side increasing and reducing the overall footprint of the unit. Highly maneuverable, the system is made of high-grade structural tensile plate steel with some steel components made with 100,000 psi steel.
Uniquely designed for easy breakdown and reassembly in a matter of hours, the Amphib MB and 20-ton excavator top can be shipped economically in three containers for contractors doing jobs in remote and distant areas.
The Amphib MB package for small and mid-sized hydraulic excavators is a natural compliment to Long Reach's product line of 100 Reach large excavator custom fronts.
|
Applications:
The Marsh Buggy has proved itself well in the following applications:
-
Dredging
-
Landscaping
-
Erosion control and prevention
-
Deepening of waterway and river delta
-
Maintenance and cleaning of rivers, lakes, shoreline, ponds, etc.
Attachment: Standard configuration of the Marsh Buggy comes with a long reach attachment
unless otherwise stated. The convenience of an extended reach and greater working range is always a welcomed advantage when carrying out work in marsh land
and dredging related projects.
|
| |
 |
| |
| |
|
| |
| |
Comparision with our Marsh Buggy a competitive unit with a CAT320 Machine
 |
| |
| |
Marsh buggy for 20 metric ton excavator --
Length approximately 9m (29.5 ft)
Height approximately 2m (6.5 ft)
Width approximately 1.2m (4ft)
Hydraulic motor = 2 sets
Weight approx. 20 ton (44,000 lb) per pair
Requires 2x 40ft containers for shipment
|
| |
| * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
| |
| |
MARSH BUGGY IN TRANSPORTATION MODE
EASY TO MOVE OVER THE ROAD
Loading the marsh buggy sections in an open top container for ocean shipment
Hauling the marsh buggy as a complete unit
to and from the port or to jobs at your location
|
| * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
| |
| |
| |
|
Used Marsh Buggies
|
| |
07092010 LinkBelt 3400 good condition, came off a job recently - P.O.R.
|
| |
| 03042010 LinkBelt 2800 Marsh Buggy 1997 year machine, 50' long boom on 5'x5'x32' pontoons - P.O.R. |
| |
| 03042010 Marsh Buggy bottom Frogco marsh buggy pontoons, dimensions 5'x5'x27',
overall width 18 - P.O.R. |
| |
01232010 CAT 322C Marsh Buggy 60' long reach on 5x32 Wilco pontoons for rent or sale, 5600 hours, painted Aug 09, pontoons excellent condition - P.O.R.
|
| |
11052009 W34 Wilco Marsh Buggy 2000 year Wilco marsh buggy bottom only, US made, Track chains heavy duty (4in) pitch new 40 hours use,
Drive chain Engineering class 78mm (3.067inch) pitch new 40 hours of use
Track cleats 76 mm 6061-T6 aluminum alloy new 40 hours of use
Power train CAT, choice of 1 of 3 tops listed below - P.O.R.
Marsh buggy bottom can be matched with this 2007 CAT 325DL that has 1009 hours, cab, A/C, reach boom, 10'6" stick, 54 bucket, 32 triple bar grouser shoes - $295,000.
Marsh buggy bottom can also be matched with 2006 CAT 325CL that has 2700 hours, 106 stick mounted on the marsh buggy, with 48 bucket - $245,000.
Marsh buggy bottom can also be matched with 2005 CAT 325CL that has 4800 hours - $199,000.
|
| |
| |
09242009 Marsh Buggy Quality Brand 2000-2001, very low hours on buggy, 400 hours, to fit Kobelco 210 excavator , will have to be retrofit to fit a CAT320 or other 20 ton excavator, dimensions: 34' long, 510 high, 183 wide - P.O.R.
  
|
| |
| |
| 09242009 Marsh Buggy Package combine the above marsh buggy with a CAT 320C, a 2006 unit with 2800 hours, mounted on the buggy with a long front - $229,000. |
