|
|
Rockblaster Hydraulic Hammer
|
Specifications (with February 2009
Pricing)
| Hammer Model |
Operating Weight |
Energy Class |
Machine Class |
Hammer Price |
Extra Tool Price |
| RB50SSG |
423 |
500 |
3.6-8,000 lbs |
$ 8,500 |
$ 415 |
| RB100G |
445 |
1000 |
6-10,000 lbs |
$ 9,700 |
$ 520 |
| RB125G |
858 |
1000 |
10-20,000 lbs |
$ 10,800 |
$ 530 |
| RB250G |
1,029 |
1,500 |
12-25,000 lbs |
$ 14,800 |
$ 1,000 |
| RB501C |
2,170 |
2,000 |
26-51,000 lbs |
$ 14,400 |
$ 905 |
| RB500G |
1,650 |
2,000 |
18-32,000 lbs |
$ 22,400 |
$ 1,145 |
| RB750G |
2,420 |
3,200 |
24-41,000 lbs |
$ 28,200 |
$ 1,470 |
| RB1000G |
3,565 |
4,500 |
36-56,000 lbs |
$ 39,700 |
$ 1,985 |
| RB1300G |
5,060 |
6,000 |
50-77,000 lbs |
$ 51,200 |
$ 2,515 |
| RB1500G |
5,750 |
8,000 |
60-100,000 lbs |
$ 66,100 |
$ 2,760 |
| RB2200GG |
10,100 |
12,000 |
100,000+ lbs |
$ 91,400 |
$ 3,765 |
Additional Specifications
| Hammer Model |
Required Oil Flow |
Blows Per Minute |
Working Pressure |
Minimum Return Line(ID) |
Tool Diameter |
| RB50SSG |
7-11 GPM |
550 to 950 |
1,280 to
1,700 PSI |
.5 IN |
53 MM |
| RB100G |
|
|
|
|
|
| RB125G |
10.5-21 GPM |
450 to 950 |
1,350 to
1,900 PSI |
.75 IN |
80 MM |
| RB250G |
12-22 GPM |
400 to 800 |
1,845 to
2,132 PSI |
.75 IN |
85 MM |
| RB501C |
100-130 L/MIN
20-28 GPM |
380 to 480 |
1,370 PSI |
1.25 IN @
30 PSI MAX |
114 MM
4.5 IN |
| RB500G |
21-29 GPM |
400 to 750 |
2,133 to
2,418 PSI |
.75 IN |
100 MM |
| RB750G |
24-32 GPM |
400 to 750 |
2,175 to
2,460 PSI |
1 IN |
120 MM |
| RB1000G |
33-40 GPM |
350 to 750 |
2,320 to
2,610 PSI |
1 IN |
135 MM |
| RB1300G |
43-51 GPM |
300 to 650 |
2,320 to
2,610 PSI |
1 IN |
150 MM |
| RB1500G |
50-65 GPM |
300 to 600 |
2,275 to
2,550 PSI |
1.25 IN |
160 MM |
| RB2200GG |
|
|
|
|
|
What You Should Know
Design improvements: No springs...no broken springs...
the old spring design has been modernized to the new and accpeted style rubber pad. No broken springs, no down time replacing the springs. Eventually springs break and have to be replaced. Rockblasters do not utilize springs.
Hose Swivels: Rockblasters have the hose swivels moved to the center
of the hammer. This shortens the hoses, streamlines them, and helps to prevent
the hose wear that occurs when mounted on the side.
Hammer Sizes: Carrier weight and useage will determine the size hammer
you will need. You can use a smaller hammer on a larger machine if they
flow and pressure are adjusted correctly. The carrier sizes and weights
are guidelines only.
· Rockblaster Hydraulic Hammers are test run and all accumulators are precharged.
· Rockblaster Hydraulic Hammers are ready to run. Flow and pressure on your carrier must be adjusted to the required specification for the hammer to maximize the preformance.
Grease: Your best friend and protector. You must grease the tool
every 2 hours while operating.
Parts: Parts can be purchased worldwide through various replacement parts manufacturers and our location in New York.
Tools: Rockblaster only uses top quality, heat treated, quality controlled
tools. All tools are in stock and can be shipped overnight.
Exchange Policy: Roundtrip freight and $300 exchange fee if unused
- $650 if used.
Safety: Read the operators manual and use caution.
|
 |
| Ransome Equipment Sales, LLC |
| 5118 Church Road, Mt. Laurel, NJ 08054 |
| Toll Free Phone: 888-726-7863 Phone: 856-778-4070 Fax: 856-778-4249 |
| E-mail: sales@ransome-equip.com |
|
